710 2nd Avenue, Suite 820, Seattle, Washington 98104 ♦ 206.682.9722 ♦ Fax 206.224.4722

Seeing Through Walls

Using Infrared Thermography

Infrared testing refers to an inspection process utilizing thermography, or infrared cameras as a means to perform situational, non-destructive testing.  Infrared testing can be performed in a variety of situations to detect problems before they become much larger issues.

Water, air flow, and heat are key hygrothermal factors in a builder's performance.  Leaking walls or windows, missing insulation, and uncontrolled air drafts carrying warm moist interior air will quickly damage building components if left unchecked.  A certified thermographer can evaluate these problems, combining the IR camera technology with building forensic destructive inspection. The thermography can help limit the amount of time and expense normally required to diagnose the problems.  Corke Amento has three Certified Thermographers, Jim Glaser, Ben Borland, and Kyle Rudkin.  Each have performed numerous investigations involving infrared thermography.

This technology is applicable to anyone involved with buildings such as property managers, building owners, contractors and maintenance supervisors.  It can be used on both interiors, exteriors, and at any time during the building's life cycle.

Even though this technology is expensive and photo interpretation should only be done by certified professionals, it is considerably more cost-effective than the old version of "hunt and peck" invasive investigation techniques.

Building Diagnostics.

Infrared testing is used to detect heating and cooling loss or moisture problems due to insulation deficiencies or construction issues.  This photo shows there is no insulation in the attic space.

 

 

Water Intrusion. 

Infrared testing is used to detect water damage and leaks allowing the opportunity to repair it before it continues to spread.  This photo shows water in the ceiling.

 

 

 

Electrical. 

Infrared testing is used as a means to detect potential circuit overload or areas of unusually high electrical resistance.

All rights reserved © 2010 Corke Amento, Inc.